All Food articles – Page 35
-
ArticleTNA installs high-speed seasoning and packaging system for Burts Snacks’ crisps
TNA has provided its long-term partner Burts Snacks with a high-speed seasoning and packaging system, seeking to achieve maximum throughput and flexibility for its crisps packaging process.
-
ArticlePlastipak claims to produce ‘world’s first’ PET resin from captured carbon emissions using LanzaTech technology
Plastipak has produced PPKNatura, said to be the world’s first PET resin made from captured carbon emissions, using LanzaTech’s carbon capture technology; it is set to be utilised in pharmaceutical- and food-grade packaging, amongst other applications.
-
ArticleSnap2Go clip-lidded tray from Sabert claims to offer fully recyclable packaging for food-to-go products
Sabert Corporation Europe has released its Snap2Go tray for chilled meals and food-to-go outlets, featuring an anti-fog, high-visibility rPET clip-lid and claiming to be fully recyclable.
-
ArticleAIMPLAS pursues improved mechanical properties for recycled materials and PHA-based barrier coatings for bioplastics
AIMPLAS is developing PHA-based water vapour barrier coatings for bioplastics and reinforced materials with improved mechanical properties as part of the European PRESERVE project – aspiring to preserve food, beverages, and non-renewable resources.
-
ArticleFood-contact, fibre-based truffle carton designed by Qualvis Packaging and Sun Chemical
Qualvis Packaging and Sun Chemical have developed a recyclable, fibre-based truffle carton – featuring aqueous varnish and bio-renewable inks suitable for direct food contact – for chocolate manufacturer Whitakers.
-
ArticleTakeaway food boxes with Notpla seaweed coating to be distributed by major supplier
Notpla has secured a listing with Bidfood Catering Supplies to distribute its seaweed-coated takeaway food boxes to foodservice customers with the aim of cutting down on single-use plastics in food delivery applications.
-
ArticleHeat-sealable and recyclable barrier paper solutions produced by Henkel and UPM Specialty Papers
Henkel and UPM Specialty Papers revealed two recyclable, heat-sealable barrier paper solutions for food and non-food packaging applications at interpack 2023.
-
ArticleWhat makes Sainsbury’s new mince format a ‘packaging fail’?
In April, we reported on the overwhelmingly negative consumer feedback to Sainsbury’s new vacuum packs for its beef mince range – which the retailer implemented in a bid to reduce its usage of plastic. In this article, Robert Lilienfeld, founder and executive director of sustainable packaging think tank SPRING, gives his views on why the solution is a ‘complete failure’.
-
ArticleSyntegon launches new VFFS machines for range of food applications
Syntegon is presenting two of its four new vertical form, fill, seal (VFFS) machines for various food applications and a second package for its cloud-based monitoring solution at interpack 2023 – aspiring to provide customers with a safe, flexible, and efficient packaging line.
-
ArticleJoint letter calls for closed-loop recycling and accessible, high-quality recyclate in suggested revisions to PPWR proposal
Various NGOs and packaging industry players have released a joint letter urging policymakers to amend the proposal for a Packaging and Packaging Waste Regulation (PPWR) to facilitate fair access to high-quality recyclate – suggesting such measures as a “priority right” to food-contact materials and a greater focus on sector-specific recycling loops.
-
ArticleKoehler Paper designs grease-proof, low-grammage paper for fast food applications
Koehler Paper is launching its NexPure OGR paper packaging with low grammage and high oil and grease resistance for fries, sandwiches, wraps, burritos, and other fast foods.
-
ArticleGreiner Packaging and partners produce injection-moulded rPET cup
Greiner Packaging, Engel, and Brink have collectively developed a thin-walled cup made of rPET that can be produced using injection moulding technology and claims to lessen CO2 equivalent (CO2e) emissions.
-
ArticleRecyclable board pack with easily-peeled plastic skin revealed by Stora Enso
Stora Enso’s new Trayforma BarrPeel – a barrier-coated board material for vacuum skin packs – hopes to allow fresh food to be packaged on recyclable paperboard trays and reduce plastic materials to less than 10% of the overall pack.
-
ArticlePolyTaksys unveils smart label in bid to prevent food loss
PolyTaksys, a Germany-based AIPIA member which has previously developed Open Monitor stickers that can reveal messages over a defined time period, is now able to announce the introduction of U4FOOD Smart Labels to address the issues of food loss and waste in the refrigeration sector.
-
ArticleTata Steel and Grupo Calvo produce lightweight, polymer-lined tuna can thought to prevent food waste
Tata Steel is presenting its collaboration with Grupo Calvo – a canned tuna pack aiming to lightweight steel packaging, reduce food waste, and stand out on the shelf – at this year’s METPACK.
-
ArticleSÜDPACK and Arla Foods aspire for circularity in chemical recycling of mozzarella maturing bags
SÜDPACK is working with Arla Foods to chemically recycle maturing bags for mozzarella cheese, developing a circular business model that aims to lessen fossil feedstock consumption and reduce its CO2 footprint.
-
ArticleMinebea Intec presents new weighing and inspection solutions, including metal detector and checkweigher user interface
Minebea Intec will showcase its Mitus metal detector and a newly developed user interface for checkweighers amongst other developments in weighing and inspection at interpack 2023.
-
ArticleExpanded polypropylene containers for food delivery revealed by Seal Packaging
Seal Packaging has launched Infinity TopSeal – its mono-material, recyclable packaging solution made from Klöckner Pentaplast’s expanded polypropylene with a heat-sealable film lid – for use in food service and delivery applications.
-
ArticleUber Eats rolls out reusable takeaway packaging trial
Uber Eats is aspiring to counteract an excess in single-use takeaway food packaging by trialling an alternative reusable system featuring doorstep collection to optimise consumer convenience.
-
ArticleITC Packaging unveils bioplastic for injection blow-moulded container production
ITC Packaging has implemented its Bio2Bio bioplastic solution into its portfolio to produce bottles, tubs, and other injection blow-moulded containers for the food and cosmetics markets.